iPhone 16 Plus Upper Connector Cover Installation

Reassembly steps for the upper connector cover...

Apple iPhone 16 Plus Moderate No estimate Guide 181268

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Reassembly steps for the upper connector cover in the iPhone 16 Plus.

Step 1

Install the upper connector cover

⌕

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Use tweezers or your fingers to align the upper connector cover with its screw holes and set it in place.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tri-point Y000 Screwdriver Referenced by the iFixit guide

View item

Install the four screws securing the upper connector cover:
Two 1.4 mm‑long Phillips screws
One 3.5 mm‑long Phillips screw
One 1.0 mm‑long tri-point Y000 screw