2012-2018 Toyota Corolla LE Headlights Replacement

Broken or dead headlights are a common issue...

iFixit Library 2012-Present Toyota Corolla Moderate 15 minutes Guide 181636

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Broken or dead headlights are a common issue that many people experience. Learn the process of replacing headlights in a 2016 Toyota Corolla LE. You can use this quickly in an emergency.

Step 1

Repair step

⌕

Pull the hood release lever under the dashboard.
Open and prop the hood open.

Step 2

Repair step

⌕

The back of the headlight assembly is inside the engine bay.
The low-beta, bulb (H11) is positioned toward the fender.
The high-beam (9005) is closer to the center of the car.

Step 3

Repair step

⌕

Press the release tab and disconnect the wiring harness from the back of the bulb.
Grip the build’s base and twist it counterclockwise about a quarter turn.
Carefully pull the bulb straight out of the headlight housing.

Step 4

Repair step

⌕

Caution: Do not touch the glass part of the new bulb with your fingers. Skin oils can shorten the bulb’s lifespan. Be sure to wear gloves, especially when handling the replacement bulb.
Hold the new bulb by its base.
To secure, insert the bulb into the socket and turn it clockwise until firmly tightened.
Reconnect the wiring harness by pushing the connector back onto the bulb until it clicks.

Step 5

Repair step

⌕

Turn on headlights to confirm they work.
If the bulb doesn’t light up:
Ensure the bulb is properly seated.
Check that the harness is securely attached.