2015-2023 Toyota Tacoma Cabin Air Filter Replacement

If your 2015–2023 Toyota Tacoma is blowing...

iFixit Library 2016-2023 Toyota Tacoma Easy 10 - 20 minutes Guide 185128

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If your 2015–2023 Toyota Tacoma is blowing stale or musty air through the vents, or your air flow has decreased significantly, this guide will help you replace the cabin air filter. The cabin air filter removes dust, pollen, and airborne particles from the air before it enters the cabin. Over time, it gets clogged and needs replacement—usually every 15,000 to 30,000 miles depending on your driving conditions. This guide will walk you through the process with simple steps and visuals. No tools are required, and the process takes less than 10 minutes. Before you begin, make sure the car is turned off and parked safely. If your glove box contains valuables or loose items, remove them first.

Step 1

Repair step

⌕

Open the passenger-side glove box by pulling it toward you.
Remove any contents inside for better access.

Step 2

Repair step

⌕

Slide the back cover of the glovebox upwards to release it.

Step 3

Repair step

⌕

Let the glove box drop down to reveal the cabin air filter housing.
Push in on both sides of the filter housing to release the side stops.
Remove the housing cover and set it aside.

Step 4

Repair step

⌕

Slide the old cabin air filter straight out of the housing.
Use a vacuum or a clean cloth to remove any dust or debris from inside the filter housing.

Step 5

Repair step

⌕

Insert the new cabin air filter, ensuring the airflow arrows match the direction from the old filter.

Step 6

Repair step

⌕

Snap the filter housing cover back into place to reattach it.
Slide the back of the glove department cover upward until it clicks in.
Close your glove compartment.