FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ (New) iPhone 15 Logic Board Installation
Official iFixit API visual reference

(New) iPhone 15 Logic Board Installation

Attributed iFixit repair guide for iPhone 15.

Apple iPhone 15 Moderate No estimate Guide 191782
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Place the logic board

(New) iPhone 15 Logic Board Installation — Place the logic board ⌕
  • Slide the logic board into its slot in the frame, making sure the nine press connectors are above the logic board.
Step 2

Install the logic board screws

(New) iPhone 15 Logic Board Installation — Install the logic board screws ⌕
  • Use your standoff driver to install the five standoff screws securing the logic board:
  • One 2.9 mm‑long screw
  • One 3.9 mm‑long screw
  • Three 3.5 mm‑long screws
  • If you don't have a standoff driver, you may use a thin flathead driver—but be careful not to strip the shallow notches in the screw heads.
Step 3

Connect the press connectors

(New) iPhone 15 Logic Board Installation — Connect the press connectors ⌕
  • Use your spudger or your fingers to connect the eight press connectors:
  • The power button
  • The volume button
  • The rear cameras and antenna (three connectors in total)
  • The eSIM
  • The Taptic Engine
  • The charging port
  • Don't connect the battery press connector yet.