Home/ Repair guides/ 2011 Toyota Camry Radio Fuse Replacement

Official iFixit API visual reference

2011 Toyota Camry Radio Fuse Replacement

If your radio or infotainment screen on a 2011...

iFixit Library 2007-2011 Toyota Camry Very easy 5 minutes Guide 197303

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If your radio or infotainment screen on a 2011 Toyota Camry has stopped working, the cause is often a blown fuse. This guide will show you how to locate, inspect, and replace the radio fuse safely and correctly. Replacing a fuse is a quick fix that restores power to your radio, screen, or aftermarket stereo without needing professional help. Make sure to use the correct 15-amp mini blade fuse and verify the fuse layout using the chart on the inside of the fuse box cover. Before starting, you want to ensure safety precautions by turning off the vehicle and removing the key from the ignition to prevent any other problems from occurring, such as electrical shock or a short circuit.

Step 1

Repair step

⌕

Safety first: Turn off the engine, remove the key from the ignition, and ensure all electrical systems are powered down before replacing the fuse.

Step 2

Repair step

⌕

To open the hood, locate the hood release lever beneath the dashboard on the driver’s side near the steering wheel. Pull the lever firmly until you hear a click or pop indicating the hood has released.

Step 3

Repair step

⌕

Open the hood and locate the relay and fuse box, which is positioned on the driver’s side near the right edge of the engine bay.

Step 4

Repair step

⌕

Press down on the tab on the top of the cover to release the locking clip.
While holding the tab down, pull the cover gently toward you.
Once the clip releases, lift the cover upward to access the fuses and relays inside.

Step 5

Repair step

⌕

Locate the radio fuse by referring to the diagram printed on the inside of the fuse box cover. This diagram identifies each fuse’s function and amperage rating.
Use the correct replacement fuse with the same amp rating specified in the diagram, typically a 15A mini blade fuse for the radio circuit.
WARNING: Using a fuse with the wrong amperage can cause electrical damage or prevent the system from working properly.

Step 6

Repair step

⌕

The fuse box cover includes three spare blade fuses — a 30A, 15A, and 10A fuse — conveniently stored for quick replacements. It also contains a built-in fuse puller that you can use to safely remove and replace any blown fuses.
Always match the replacement fuse’s amperage rating with the original to avoid electrical damage or circuit failure.

Step 7

Repair step

⌕

The good fuse on the left shows an intact metal strip running through the center, allowing electrical current to flow normally.
The blown fuse on the right has a broken or melted metal strip, indicating it has failed and needs to be replaced.

Step 8

Repair step

⌕

Use the fuse puller to grip the blown fuse and gently pull it straight out. Insert the new fuse of the same amperage rating into the slot and push firmly until it’s fully seated and secure.
Make sure the fuse fits snugly — a loose connection can cause the circuit to fail again.
🏆🤩🏆 Congratulations! You’ve successfully replaced the fuse! Turn on your car and test the radio or screen. Enjoy the sound and display coming back to life! 🎶🎉