2009 Toyota Corolla LE Windshield Wiper Blade Replacement

This guide walks you through the steps to...

iFixit Library 2006-2013 Toyota Corolla Easy 5 - 10 minutes Guide 197827

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide walks you through the steps to safely and efficiently replace the front windshield wiper blades on a 2009 Toyota Corolla LE. Windshield wipers are essential for maintaining visibility and driving safely, especially in rain or poor weather conditions. Wiper blades typically need to be replaced every 6–12 months, depending on climate and usage. Extreme heat and cold can cause the rubber to deteriorate more quickly. Common signs that it’s time to replace your wiper blades include streaking, squeaking, or reduced clearing performance. These instructions apply to both the driver- and passenger-side windshield wiper blades. The driver-side blade measures 26 inches, and the passenger-side blade measures 16 inches.

Step 1

Repair step

⌕

Lift the old wiper arm away from the windshield.
The arm should stay up on its own.

Step 2

Repair step

⌕

Press the tab under the old windshield wiper to release it from the metal arm. It helps to wiggle the blade if stuck to the arm.
Unhook the wiper blade from the arm completely and remove it.
It helps to wiggle the blade if it's stuck to the arm.
This car's metal arm connector is a J-hook blade.

Step 3

Repair step

⌕

Align the new blade with the connector of the wiper arm.

Step 4

Repair step

⌕

Pull back on the blade until you hear or feel a click to the wiper arm.
Gently pull on it to ensure it's locked in place.

Step 5

Repair step

⌕

Carefully lower the arm back onto the windshield.