FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ 1999-2005 Pontiac Grand Am Passenger side windo…
Official iFixit API visual reference

1999-2005 Pontiac Grand Am Passenger side window regulator (power windows) Replacement

Attributed iFixit repair guide for 1999-2005 Pontiac Grand Am.

iFixit Library 1999-2005 Pontiac Grand Am Moderate 30 - 45 minutes Guide 19856
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Repair step

1999-2005 Pontiac Grand Am Passenger side window regulator (power windows) Replacement — repair step ⌕
Phillips #2 Screwdriver
TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide
View item
  • First locate the 4 screws to remove the door panel. See pic1
  • 2 screws are visible.
  • The other 2 screws are behind items.
  • Location of the screws.
  • First screw is under the door lock/window controls. See pic 2.
  • Next screw located lower right of panel behind reflector. See pic 3
  • To remove the door/window controls pry on one end of the controls and lift up. See pic 2.
  • To remove the reflector pry one side and remove from the panel. See pic 3.
Step 2

Removing panel from door.

1999-2005 Pontiac Grand Am Passenger side window regulator (power windows) Replacement — Removing panel from door. ⌕
Phillips #2 Screwdriver
TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide
View item
  • Before removing panel, remove small tweeter speaker from top of door panel.. Clipped in just pull the top. Pic 1
  • After removing screws, Pull on the panel around the outside to release the pop-in clips.
  • Then remove the panel from the door by lifting up and backward on the panel. Pic 2
  • Be mindful of the rail on top of the panel that may or may not fall off the panel.
  • Also make sure you remove any wires that is connected to the door panel. Lock controls, tweeter speaker wires.
Step 3

Repair step

No step image supplied by iFixit.
Phillips #2 Screwdriver
TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide
View item
  • On the bottom of the glass inside the door there are two bolts that hold the window to the plastic track on the regulator.
  • Before you remove the second screw hold the window to prevent breakage of the window.
  • While holding the window remove the second screw and lift out the window from the door.
  • Locate and loosen the 4 bolts holding the regulator. See pic 1.
  • Then remove the window regulator motor and all of the track from the door...
Step 4

Repair step

No step image supplied by iFixit.
  • Then replace the regulator and reverse the procedure to install the regulator back in the door.