FIXONICPlace the earpiece speaker
- Align the gasket on the earpiece speaker with its sound channel.
- Press the earpiece speaker onto the frame so it lies flat.
Official iFixit API visual reference
Open the authorised source
(New) iPhone 15 Earpiece Speaker Installation (for Logic Board)
Attributed iFixit repair guide for iPhone 15.
Apple iPhone 15
Moderate
No estimate
Guide 203480
Licensed iFixit integration
This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.
Install the earpiece speaker screws
Install the front camera assembly
- Slide the front camera assembly into its recess in the frame.
- Set the assembly down so it lies flat.
Connect the assemblies
- Use the flat end of a spudger or your finger to connect the front camera and earpiece speaker press connectors.
- If the iPhone has a mmWave antenna, connect it as well.
Install the upper connector cover
- Place the cover over the logic board and align its screw holes.
- Use your tri-point Y000 driver to install the two 1.3 mm‑long screws securing the upper connector cover.