2012 Nissan Murano Driver Side Mirror Replacement

Step 1

Repair step

⌕

• Pull out the Driver preset panel, if your options package included this. Usually no tools required.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide

View item

• Expose one of three screws by prying the door handle trim plate out.

Step 3

Repair step

⌕

• Pry out the door lock and window control panel. Disconnect all connectors on the back side.

Step 4

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide

View item

• Pry up the arm rest to expose the second hidden screw (total of 3).

Step 5

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide

View item

• Now you can remove all three hidden screws with the 10mm socket or philips screw driver.

Step 6

Repair step

No step image supplied by iFixit.

• Now the door panel itself can be pried off the door. Starting at the bottom, find the plastic friction plugs and pull enough to pop them out one by one.
• Then lift the door panel up off the door. You do not need to remove it completly. This should give you enough room to work on the mirror in the next steps.

Step 7

Repair step

⌕

• Pull the inside mirror cover off.

Step 8

Repair step

⌕

• Unplug the mirror wiring harness. The connector on the door will stay put.

Step 9

Repair step

⌕

• Remove the three nuts holding the mirror on to the door. Depending on the age of your vehicle, you may want to clean off the remaining area so the new mirror seals good.