FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ 2014-Present Kia Sedona Cargo Lamp Bulb Replace…
Official iFixit API visual reference

2014-Present Kia Sedona Cargo Lamp Bulb Replacement

This guide shows how to remove and replace the...

iFixit Library 2025-Present Kia Carnival MPV Moderate 5 - 20 minutes Guide 205024
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide shows how to remove and replace the cargo lamp bulb in a Kia Carnival. The guide is written with a 2025 Kia Carnival SX Hybrid.

Step 1

Remove the lens cover

2014-Present Kia Sedona Cargo Lamp Bulb Replacement — Remove the lens cover ⌕
Metal Spudger
TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide
View item
  • The lens cover has six plastic tabs that hold it in place.
  • The two rear tabs are larger and harder to unclip.
Step 2

Repair step

2014-Present Kia Sedona Cargo Lamp Bulb Replacement — repair step ⌕
Jimmy
TOOL USED ON THIS STEP Jimmy Referenced by the iFixit guide
View item
Metal Spudger
TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide
View item
  • These tabs are very stiff. Take your time and be careful not to scratch the plastic. You may need to use a bit of force to unclip these.
  • Insert a metal spudger or a small flathead screwdriver into the front seam near the toggle switch.
  • Pry to release the front tabs.
  • Use a spudger or Jimmy to pry and release the side tabs.
  • Tilt and wiggle the lens cover until the rear tabs release.
  • Remove the lens cover and the gray cover plate behind it.
Step 3

Replace the bulb

2014-Present Kia Sedona Cargo Lamp Bulb Replacement — Replace the bulb ⌕
  • Pull the bulb out of its two clips and remove it.
Step 4

Reinstall the lens cover

2014-Present Kia Sedona Cargo Lamp Bulb Replacement — Reinstall the lens cover ⌕
Metal Spudger
TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide
View item
  • Align and stack the lens cover and gray cover plate together
  • Insert the two larger rear tabs into their recesses.
  • Press the covers into place until all tabs click into place.