iPhone 17 Pro Max Loudspeaker Installation

Attributed iFixit repair guide for iPhone 17 Pro Max.

Apple iPhone 17 Pro Max Moderate No estimate Guide 206229

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Install the loudspeaker

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

Align the bottom edge of the loudspeaker with the frame and lay it in its recess.
Make sure the bottom-right screw tab seats properly against the frame. Gently bend it if it's out of place.
Use your finger to press down on the loudspeaker until it clicks in place.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

Use a JIS 00 screwdriver to install the six loudspeaker screws:
Two 2.7 mm‑long screws
Two 2.0 mm‑long screws
One 1.5 mm‑long screw
One 1.5 mm‑long screw attached to the bottom edge of the iPhone frame

Step 3

Install the buffer strip

⌕

Use your fingers or a spudger to press the buffer strip back onto the top edge of the Taptic Engine.