FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

iPhone 17 Pro Max Lower Microphone Removal

Attributed iFixit repair guide for iPhone 17 Pro Max.

Apple iPhone 17 Pro Max Moderate No estimate Guide 206251
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Disconnect the lower microphone

  • Use the point of a spudger to pry up and disconnect the lower microphone connector.
Step 2

Repair step

  • Remove the two screws securing the lower microphone:
  • One 3.2 mm-long standoff screw
  • One 3.1 mm-long JIS 00 screw attached to the bottom edge of the iPhone frame
Step 3

Soften the adhesive gasket

  • The lower microphone is still attached to the frame by an adhesive gasket.
  • Use a hair dryer or an iOpener to heat the bottom-right corner of the iPhone until it's warm to the touch.
Step 4

Remove the lower microphone

  • Insert the point of an opening pick between the lower microphone and the frame.
  • Slide the pick along the edge to create a gap between the microphone and the frame.
Step 5

Repair step

  • Insert the flat edge of a spudger into the gap between the lower microphone and the frame.
  • Twist the spudger slowly to pry the microphone off the frame.
  • Remove the lower microphone.