FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

iPhone 17 Pro Max Lower Microphone Installation

Attributed iFixit repair guide for iPhone 17 Pro Max.

Apple iPhone 17 Pro Max Moderate No estimate Guide 206255
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Remove the microphone adhesive gasket

  • If the adhesive gasket isn't deformed and your lower microphone didn't come with a replacement gasket, you can keep and reuse the gasket. Be aware that you'll lose water and dust resistance.
  • Use tweezers to remove the microphone adhesive gasket from the frame.
Step 2

Install the lower microphone

  • If your replacement lower microphone comes with an adhesive gasket pre-installed, make sure to remove any liners to expose the adhesive.
  • Use tweezers to align the microphone with the frame.
  • Slide the microphone into its recess and press it in place. There should be almost no gap between the microphone and the frame.
Step 3

Repair step

  • Use a hair dryer or an iOpener to heat the lower microphone until it's warm to the touch. This helps strengthen the adhesive bond.
Step 4

Repair step

  • Install the two lower microphone screws:
  • One 3.2 mm-long standoff screw
  • One 3.1 mm-long JIS 00 screw attached to the bottom edge of the iPhone frame
Step 5

Repair step

  • Use your finger to press and connect the lower microphone press connector.