iPhone 17 Pro Front Sensors Installation

Attributed iFixit repair guide for iPhone 17 Pro.

Apple iPhone 17 Pro Moderate No estimate Guide 207241

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Attach the front sensors

⌕

The next four steps show how to attach the front sensors to the replacement screen. If your screen comes with front sensors preinstalled, skip down four steps.
Use your finger to press the rectangular section of the front sensors cable onto the screen.
Use a hair dryer or iOpener to soften the adhesive under the cable to help it stick. It only needs to be warm—not hot.
If the cable isn't sticking, apply a small piece of double-sided tape to the back of the cable.

Step 2

Repair step

⌕

Use your finger or a spudger to press the ambient light sensor and microphone into their recesses.

Step 3

Repair step

⌕

Hook the left tab of the front sensors bracket onto the screen and set it into place.

Step 4

Repair step

⌕

Use a tri‑point Y000 screwdriver to install the two 1.0 mm‑long front sensors screws.