Home/ Repair guides/ iPhone 17 Pro Logic Board Intermediate Removal

Official iFixit API visual reference

iPhone 17 Pro Logic Board Intermediate Removal

Intermediate logic board disassembly steps....

Apple iPhone 17 Pro Moderate No estimate Guide 207247

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Intermediate logic board disassembly steps. This can either conclude with the logic board removal or with LiDAR removal.

Step 1

Remove the front camera connector cover

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use a tri-point Y000 screwdriver to remove the 1.0 mm‑long screw securing the front camera connector cover.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use tweezers to unhook and remove the front camera connector cover.

Step 3

Remove the front camera assembly

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use the point of a spudger to pry up and disconnect the two front camera connectors (one's under the other) from the logic board.

Step 4

Repair step

⌕

Lift and remove the front camera assembly from its recess.

Step 5

Remove the top speaker

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

Use a JIS 00 screwdriver to remove the three 2.2 mm‑long screws securing the top speaker.

Step 6

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use the point of a spudger to pry up and loosen the top speaker.
Remove the top speaker.

Step 7

Remove the button connector cover

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use a tri-point Y000 screwdriver to remove the 1.0 mm‑long screw securing the button connector cover.

Step 8

Repair step

⌕

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use tweezers to unlatch the button connector cover from the logic board and remove it.

Step 9

Disconnect the logic board

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use the point of a spudger to pry up and disconnect the two press connectors along the top edge of the logic board.

Step 10

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use the point of a spudger to pry up and disconnect five press connectors on the logic board:
Two button board connectors (one's underneath the other)
Two USB-C port assembly connectors (one's underneath the other)
One power button connector

Step 11

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Don't attempt to remove the logic board. It's still attached to the frame by the underside flex cable(s).
Use your fingers to carefully tilt the bottom left corner of the logic board up until it stands vertical.
Shift the logic board as needed to maintain slack on the underside flex cable(s).