Home/ Repair guides/ iPhone 17 Pro Rear Camera Assembly Installation

Official iFixit API visual reference

iPhone 17 Pro Rear Camera Assembly Installation

Attributed iFixit repair guide for iPhone 17 Pro.

Apple iPhone 17 Pro Moderate No estimate Guide 207258

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Install the rear camera assembly

⌕

Lay the rear camera assembly in its recess.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use your finger to press and connect the three camera press connectors onto the logic board.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide

View item

Use a Torx Plus 4IP screwdriver to install the three rear camera assembly screws:
Two 4.0 mm‑long screws
One 4.4 mm‑long screw
Make sure to install this in the proper screw hole.

Step 4

Install the rear camera connector cover

⌕

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use tweezers to latch the rear camera connector cover onto the logic board and lay it in place.

Step 5

Repair step

⌕

TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use a tri-point Y000 screwdriver to install the 1.0 mm‑long camera connector cover screw.