Home/ Repair guides/ iPhone 17 Pro Rear Camera Assembly Removal

Official iFixit API visual reference

iPhone 17 Pro Rear Camera Assembly Removal

Attributed iFixit repair guide for iPhone 17 Pro.

Apple iPhone 17 Pro Moderate No estimate Guide 207259

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Remove the rear camera connector cover

⌕

TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use a tri-point Y000 screwdriver to remove the 1.0 mm‑long screw securing the rear camera connector cover.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use tweezers to unlatch the rear camera connector cover from the logic board and remove it.

Step 3

Disconnect the rear camera assembly

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use the point of a spudger to pry up and disconnect the three rear camera press connectors.
One of the connectors is under the other.

Step 4

Remove the rear camera assembly

⌕

TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide

View item

Use a Torx Plus 4IP screwdriver to remove the three screws securing the rear camera assembly:
Two 4.0 mm‑long screws
One 4.4 mm‑long screw

Step 5

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use the point of a spudger to pry up the top edge of the rear camera assembly.
Grab the assembly with your fingers and remove it.