Home/ Repair guides/ iPhone 17 Pro Taptic Engine Removal

Official iFixit API visual reference

iPhone 17 Pro Taptic Engine Removal

Attributed iFixit repair guide for iPhone 17 Pro.

Apple iPhone 17 Pro Moderate No estimate Guide 207263

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Remove the ground clip

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP iPhone Standoff Screwdriver Bit Referenced by the iFixit guide

View item

Use a JIS 00 screwdriver to remove the two 2.0 mm‑long screws securing the ground clip.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use tweezers to remove the ground clip.
The clip is delicate and easy to lose. Store it in a safe place for reassembly.

Step 3

Loosen the flex antenna

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP iPhone Standoff Screwdriver Bit Referenced by the iFixit guide

View item

Use a JIS 00 screwdriver to remove the three 2.0 mm‑long screws securing the flex antenna.

Step 4

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

Use your fingers or a spudger to swing the flex antenna out of the way to access the screws beneath it.

Step 5

Remove the Taptic Engine

⌕

TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP iPhone Standoff Screwdriver Bit Referenced by the iFixit guide

View item

Use a standoff screwdriver to remove the two 4.0 mm‑long screws securing the Taptic Engine.

Step 6

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use your fingers to flip the Taptic Engine out of its recess and onto the edge of the iPhone.
Hold onto the Taptic Engine during the next step to prevent straining its cable.

Step 7

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use the point of a spudger to pry up the Taptic Engine press connector and disconnect it.

Step 8

Repair step

⌕

Remove the Taptic Engine.