FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ iPhone 17 Pro USB-C Port Assembly Replacement
Official iFixit API visual reference

iPhone 17 Pro USB-C Port Assembly Replacement

Follow this guide to remove and replace the...

Apple iPhone 17 Pro Moderate 1 - 3 hours Guide 207498
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Follow this guide to remove and replace the USB-C port assembly in an iPhone 17 Pro. If you experience intermittent connectivity or charging with the port, you may need to replace the port. This procedure requires extensive disassembly. Before you replace the USB-C port, try cleaning it out first. Rule out any software culprits or other hardware possibilities. The USB-C port assembly includes the USB-C port, a microphone, and antennas.

Step 1

Safety precautions

iPhone 17 Pro USB-C Port Assembly Replacement — Safety precautions ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Let your iPhone's battery drain below 25% before starting this repair—a charged lithium‑ion battery may catch fire if damaged.
  • Unplug all cables from your phone.
  • Hold the power and either volume button and slide to power off your phone.
Step 2

Cracked glass preparation

iPhone 17 Pro USB-C Port Assembly Replacement — Cracked glass preparation ⌕
Safety Glasses
TOOL USED ON THIS STEP Safety Glasses Referenced by the iFixit guide
View item
Suction Handle
TOOL USED ON THIS STEP Suction Handle Referenced by the iFixit guide
View item
  • Glass shards can complicate disassembly—or worse, cause injury. If your phone is cracked, follow this step.
  • Apply strips of packing tape to the cracked glass until it's completely covered—this will help keep the glass contained and allow the suction cup to stick.
  • Make sure there's a single strip of tape (not overlapping) across the bottom edge, big enough for a suction cup to fit on.
  • Only cover the glass itself—don't stick any tape to the frame.
  • Consider wearing safety glasses to protect your eyes from any glass shaken free during the repair.
Step 3

Remove the pentalobe screws

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the pentalobe screws ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a P2 pentalobe screwdriver to remove the two 7.5 mm‑long screws on either side of the charging port.
Step 4

Mark your opening picks

iPhone 17 Pro USB-C Port Assembly Replacement — Mark your opening picks ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • If inserted too far, an opening pick can damage your device. Follow this step to mark your pick and prevent damage.
  • Measure 3 mm from the tip and mark the opening pick with a permanent marker.
  • Alternatively, you can tape a coin 3 mm from the tip of the pick.
Step 5

Heat the bottom edge

iPhone 17 Pro USB-C Port Assembly Replacement — Heat the bottom edge ⌕
Heat Gun
TOOL USED ON THIS STEP Heat Gun Referenced by the iFixit guide
View item
  • Use a hair dryer or heat gun to heat the bottom edge of the screen until it's slightly too hot to touch.
  • Improper use of a heat gun can destroy the display and/or battery—follow the linked instructions carefully.
Step 6

Apply a suction handle

iPhone 17 Pro USB-C Port Assembly Replacement — Apply a suction handle ⌕
Suction Handle
TOOL USED ON THIS STEP Suction Handle Referenced by the iFixit guide
View item
  • Apply a suction handle to the bottom edge of the screen, as close to the edge as possible.
Step 7

Screen bezel information

iPhone 17 Pro USB-C Port Assembly Replacement — Screen bezel information ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • During the next step, make sure you're inserting your pick in the correct location:
  • There's a plastic bezel on the underside of the screen that sits on the frame. Insert your pick here, making sure it's completely under the bezel.
  • There's a seam between the plastic bezel and the display panel. Don't insert your pick here or you'll separate the two, complicating the repair.
Step 8

Insert an opening pick

iPhone 17 Pro USB-C Port Assembly Replacement — Insert an opening pick ⌕
Suction Handle
TOOL USED ON THIS STEP Suction Handle Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Pull up on the suction handle with strong, steady force until a gap forms between the screen and frame.
  • This may take significant force. If you're having trouble, reheat the screen and try again.
  • Insert the tip of an opening pick in the gap you just created.
Step 9

Screen information

iPhone 17 Pro USB-C Port Assembly Replacement — Screen information ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Don't insert your pick more than 3 mm under the screen to avoid damaging the following components:
  • The screen and ambient light sensor cables are located near the volume and Action buttons.
  • There are delicate spring contacts around the perimeter of the phone.
  • The underside of the screen has thin, metal clips that go into corresponding slots on the frame.
Step 10

Separate the bottom edge adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Separate the bottom edge adhesive ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Slide the opening pick along the bottom edge to separate the adhesive.
  • Leave the pick inserted under the bottom right corner to prevent the adhesive from re‑sealing.
Step 11

Remove the suction handle

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the suction handle ⌕
Suction Handle
TOOL USED ON THIS STEP Suction Handle Referenced by the iFixit guide
View item
  • Pull the small nub on the suction cup to remove it from the screen.
Step 12

Heat the right edge

iPhone 17 Pro USB-C Port Assembly Replacement — Heat the right edge ⌕
Heat Gun
TOOL USED ON THIS STEP Heat Gun Referenced by the iFixit guide
View item
  • Use a hair dryer or heat gun to heat the right edge of the screen until it's slightly too hot to touch.
Step 13

Separate the right edge adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Separate the right edge adhesive ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Insert a second opening pick under the bottom right corner of the screen.
  • Slide the pick up the right edge to separate the adhesive and release the two clips.
  • You may need to pry the screen up slightly to release the clips
  • Leave the pick inserted under the top right corner to prevent the adhesive from re‑sealing.
Step 14

Heat the top edge

iPhone 17 Pro USB-C Port Assembly Replacement — Heat the top edge ⌕
Heat Gun
TOOL USED ON THIS STEP Heat Gun Referenced by the iFixit guide
View item
  • Use a hair dryer or heat gun to heat the top edge of the screen until it's slightly too hot to touch.
Step 15

Separate the top edge adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Separate the top edge adhesive ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Insert a third opening pick under the top right corner of the screen.
  • Slide the pick along the top edge and just barely around the top left corner to separate the adhesive and release the two clips.
  • Don't slide the pick farther, or you may damage the ambient light sensor cable.
  • Leave the pick inserted under the top left corner to prevent the adhesive from re‑sealing.
Step 16

Heat the left edge

iPhone 17 Pro USB-C Port Assembly Replacement — Heat the left edge ⌕
Heat Gun
TOOL USED ON THIS STEP Heat Gun Referenced by the iFixit guide
View item
  • Use a hair dryer or heat gun to heat the left edge of the screen until it's slightly too hot to touch.
Step 17

Separate the left edge adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Separate the left edge adhesive ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Insert a fourth opening pick under the bottom left corner of the screen.
  • Slide the pick up the right edge to separate the adhesive and release the clip, stopping just before the volume up button.
  • You may need to pry up the screen slightly to release the clip.
  • Don't slide the pick farther, or you may damage the screen cable.
Step 18

Prop up the screen

iPhone 17 Pro USB-C Port Assembly Replacement — Prop up the screen ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • At this point, the screen should be completely detached from the frame. If it feels stuck, go back around the perimeter and separate any remaining adhesive or clips.
  • Lift the screen straight up and swing it over the left edge, propping it up against a sturdy box or stack of books so the cables aren't strained.
  • Alternatively, you can lay the screen down flat over the left side.
Step 19

Remove the cover screws

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the cover screws ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.
  • Use a JIS 00 screwdriver to remove the two screws securing the cable covers:
  • One 1.4 mm‑long screw for the screen and front sensor cable cover
  • One 1.3 mm‑long screw for the battery cover
  • Small iFixit Phillips bits are designed to work with JIS screws. You can try Phillips drivers from other manufacturers, but you risk stripping the screw.
Step 20

Remove the covers

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the covers ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Remove the two covers.
Step 21

Disconnect the battery

iPhone 17 Pro USB-C Port Assembly Replacement — Disconnect the battery ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use the point of a spudger to pry up and disconnect the battery press connector.
Step 22

Disconnect the screen

iPhone 17 Pro USB-C Port Assembly Replacement — Disconnect the screen ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Use the tip of an opening pick or the point of a spudger to pry up and disconnect the screen and ambient light sensor press connectors.
Step 23

Remove the screen

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the screen ⌕
  • Remove the screen.
Step 24

Remove the battery tray screws

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the battery tray screws ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a Torx Plus 4IP screwdriver to remove the screws securing the battery tray:
  • One 7.5 mm‑long screw
  • One 5.9 mm‑long screw
  • One 3.4 mm‑long screw
  • One 2.3 mm‑long screw
  • Nine 3.7 mm‑long screws
  • One 3.7 mm‑long screw
  • iPhone models with a physical SIM card won't have this screw.
Step 25

Remove the battery

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the battery ⌕
  • Use your finger to lift the top left corner of the battery tray and remove it.
  • Be careful not to smudge the front camera.
Step 26

Separate the buffer strip

iPhone 17 Pro USB-C Port Assembly Replacement — Separate the buffer strip ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Slide the tip of an opening pick along the top edge of the Taptic Engine to separate the plastic buffer strip adhered to it.
Step 27

Remove the loudspeaker

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the loudspeaker ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to remove the six screws securing the loudspeaker:
  • Two 2.7 mm‑long screws
  • Two 2.0 mm‑long screws
  • One 1.5 mm‑long screw
  • One 1.5 mm‑long screw attached to the bottom edge
Step 28

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • An adhesive gasket holds the loudspeaker to the frame.
  • Tilt the top edge of the loudspeaker out of its recess.
  • Slowly pull the loudspeaker away from the frame to release the adhesive.
  • Remove the loudspeaker.
Step 29

Remove the ground clip

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the ground clip ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to remove the two 2.0 mm‑long screws securing the ground clip.
Step 30

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use tweezers to remove the ground clip.
  • The clip is delicate and easy to lose. Store it in a safe place for reassembly.
Step 31

Loosen the flex antenna

iPhone 17 Pro USB-C Port Assembly Replacement — Loosen the flex antenna ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to remove the three 2.0 mm‑long screws securing the flex antenna.
Step 32

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
  • Use your fingers or a spudger to swing the flex antenna out of the way to access the screws beneath it.
Step 33

Remove the Taptic Engine

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the Taptic Engine ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a standoff screwdriver to remove the two 4.0 mm‑long screws securing the Taptic Engine.
Step 34

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use your fingers to flip the Taptic Engine out of its recess and onto the edge of the iPhone.
  • Hold onto the Taptic Engine during the next step to prevent straining its cable.
Step 35

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use the point of a spudger to pry up the Taptic Engine press connector and disconnect it.
Step 36

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
  • Remove the Taptic Engine.
Step 37

Disconnect the lower microphone

iPhone 17 Pro USB-C Port Assembly Replacement — Disconnect the lower microphone ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use the point of a spudger to pry up and disconnect the lower microphone connector.
Step 38

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Remove the two screws securing the lower microphone:
  • One 3.2 mm-long standoff screw
  • One 3.1 mm-long JIS 00 screw attached to the bottom edge of the iPhone frame
Step 39

Soften the adhesive gasket

iPhone 17 Pro USB-C Port Assembly Replacement — Soften the adhesive gasket ⌕
iOpener
TOOL USED ON THIS STEP iOpener Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • The lower microphone is still attached to the frame by an adhesive gasket.
  • Use a hair dryer or an iOpener to heat the bottom-right corner of the iPhone until it's warm to the touch.
Step 40

Remove the lower microphone

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the lower microphone ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Insert the point of an opening pick between the lower microphone and the frame.
  • Slide the pick along the edge to create a gap between the microphone and the frame.
Step 41

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Insert the flat edge of a spudger into the gap between the lower microphone and the frame.
  • Twist the spudger slowly to pry the microphone off the frame.
  • Remove the lower microphone.
Step 42

Disconnect the USB-C port assembly

iPhone 17 Pro USB-C Port Assembly Replacement — Disconnect the USB-C port assembly ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use the point of a spudger to pry up and disconnect the two USB-C port assembly press connectors (one's underneath the other) from the bottom-left corner of the logic board.
Step 43

Remove the USB-C port assembly screws

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the USB-C port assembly screws ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Remove the screws securing the USB-C port assembly:
  • Three 1.5 mm‑long JIS 00 screws
  • Two 1.7 mm‑long JIS 00 screws
  • One 1.3 mm‑long JIS 00 screw
  • One 1.2 mm‑long tri-point Y000 screw
  • If your iPhone doesn't have mmWave functionality, you may not have this screw.
Step 44

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to remove the 1.2 mm‑long screw securing the USB-C port assembly to the bottom left corner of the frame.
Step 45

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to remove the two 3.3 mm‑long screws securing the USB-C port to the bottom edge of the frame.
Step 46

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to remove the 1.2 mm‑long screw securing the USB-C port assembly to the right edge of the frame.
Step 47

Soften the USB-C assembly adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Soften the USB-C assembly adhesive ⌕
iOpener
TOOL USED ON THIS STEP iOpener Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Use a hair dryer or an iOpener to heat the entire USB-C port assembly until it's warm to the touch.
Step 48

Separate the microphone module

iPhone 17 Pro USB-C Port Assembly Replacement — Separate the microphone module ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Slide the point of an opening pick between the microphone module (left of the USB-C port) and the bottom edge of the frame.
  • Pry gently to separate the microphone from the frame.
Step 49

Remove the USB-C port assembly

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the USB-C port assembly ⌕
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • The large black graphite sheet inside the frame is delicate. Be very mindful not to tear it with your opening pick.
  • Slide the opening pick under the USB-C port assembly, near the center.
  • Slide the pick towards the right edge of the frame to separate the adhesive holding the assembly.
Step 50

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Grab the USB-C port assembly with your fingers and slowly pull it away from the frame to remove it.
  • If the USB-C port assembly feels stuck, check for any missed screws and separate any remaining adhesive.
Step 51

Disassembly complete

iPhone 17 Pro USB-C Port Assembly Replacement — Disassembly complete ⌕
  • Congratulations on completing disassembly! The remaining steps will show how to reassemble your iPhone.
  • Depending on your iPhone model, some reassembly photos may have minor visual discrepancies. The procedure, however, will be correct for your iPhone.
Step 52

Install the USB-C port assembly

iPhone 17 Pro USB-C Port Assembly Replacement — Install the USB-C port assembly ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Carefully inspect your replacement USB-C port assembly and remove any adhesive liners.
  • Align the assembly with the bottom edge of the frame and lay it loosely in place.
  • Make sure the assembly tucks below the black plastic speaker channel.
Step 53

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • The metal mounting tab near the top of the USB-C port assembly has a bend that has to sit underneath the logic board.
  • Tuck the metal mounting tab's bend underneath the logic board. When it's properly positioned, the mounting tab's screw hole should line up correctly.
Step 54

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the two 3.3 mm‑long USB-C port screws to the bottom edge of the frame.
  • Make sure to install these screws in the holes marked in green, not red.
Step 55

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Install the USB-C port assembly screws:
  • Three 1.5 mm‑long JIS 00 screws
  • Two 1.7 mm‑long JIS 00 screws
  • One 1.3 mm‑long JIS 00 screw
  • One 1.2 mm‑long Y000 screw
  • If your iPhone doesn't have mmWave functionality, you may not have this screw.
Step 56

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the 1.2 mm‑long USB-C port assembly screw to the bottom left corner of the frame.
Step 57

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the 1.2 mm‑long USB-C port assembly screw to the right edge of the frame.
Step 58

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • If the microphone adhesive gasket isn't deformed and your replacement USB-C port assembly didn't come with adhesive, you can reuse the existing gasket. Be aware that you'll lose water and dust resistance.
  • Use tweezers to remove the adhesive from where the microphone attaches to the frame.
  • You can use some double-sided tape as a replacement adhesive. Use a pin to poke a hole through the tape. Enlarge it enough for the mic hole, then apply the tape to the microphone.
  • Use your finger to align and press the microphone module onto the frame.
Step 59

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iOpener
TOOL USED ON THIS STEP iOpener Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Use a hair dryer or an iOpener to heat the entire USB-C port assembly until it's warm to the touch. This helps the adhesive to bond better.
Step 60

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use your finger to press and connect the two USB-C port assembly press connectors (one's underneath the other) to the logic board.
Step 61

Remove the microphone adhesive gasket

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the microphone adhesive gasket ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • If the adhesive gasket isn't deformed and your lower microphone didn't come with a replacement gasket, you can keep and reuse the gasket. Be aware that you'll lose water and dust resistance.
  • Use tweezers to remove the microphone adhesive gasket from the frame.
Step 62

Install the lower microphone

iPhone 17 Pro USB-C Port Assembly Replacement — Install the lower microphone ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • If your replacement lower microphone comes with an adhesive gasket pre-installed, make sure to remove any liners to expose the adhesive.
  • Use tweezers to align the microphone with the frame.
  • Slide the microphone into its recess and press it in place. There should be almost no gap between the microphone and the frame.
Step 63

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iOpener
TOOL USED ON THIS STEP iOpener Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Use a hair dryer or an iOpener to heat the lower microphone until it's warm to the touch. This helps strengthen the adhesive bond.
Step 64

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Install the two lower microphone screws:
  • One 3.2 mm-long standoff screw
  • One 3.1 mm-long JIS 00 screw attached to the bottom edge of the iPhone frame
Step 65

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use your finger to press and connect the lower microphone press connector.
Step 66

Install the Taptic Engine

iPhone 17 Pro USB-C Port Assembly Replacement — Install the Taptic Engine ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Place the Taptic Engine upside down on the edge of the iPhone frame.
  • While holding the Taptic Engine with one hand, use your finger to press and connect the Taptic Engine press connector.
Step 67

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Flip the Taptic Engine over the frame and align it using its screw holes.
  • The Taptic Engine flex cable should fold neatly between the Taptic Engine and the frame.
Step 68

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a standoff screwdriver to install the two 4.0 mm‑long Taptic Engine screws.
Step 69

Attach the flex antenna

iPhone 17 Pro USB-C Port Assembly Replacement — Attach the flex antenna ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use your fingers or a spudger to fold the flex antenna down in place.
Step 70

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the three 2.0 mm‑long flex antenna screws.
Step 71

Install the ground clip

iPhone 17 Pro USB-C Port Assembly Replacement — Install the ground clip ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use tweezers to carefully place the ground clip in place.
  • Be sure to orient this clip correctly as shown in the images.
Step 72

Install the ground clip

iPhone 17 Pro USB-C Port Assembly Replacement — Install the ground clip ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the two 2.0 mm‑long ground clip screws.
Step 73

Install the loudspeaker

iPhone 17 Pro USB-C Port Assembly Replacement — Install the loudspeaker ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Align the bottom edge of the loudspeaker with the frame and lay it in its recess.
  • Make sure the bottom-right screw tab seats properly against the frame. Gently bend it if it's out of place.
  • Use your finger to press down on the loudspeaker until it clicks in place.
Step 74

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the six loudspeaker screws:
  • Two 2.7 mm‑long screws
  • Two 2.0 mm‑long screws
  • One 1.5 mm‑long screw
  • One 1.5 mm‑long screw attached to the bottom edge of the iPhone frame
Step 75

Install the buffer strip

iPhone 17 Pro USB-C Port Assembly Replacement — Install the buffer strip ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use your fingers or a spudger to press the buffer strip back onto the top edge of the Taptic Engine.
Step 76

Install the battery

iPhone 17 Pro USB-C Port Assembly Replacement — Install the battery ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Lay the battery tray in place.
  • Make sure not to trap any cables underneath the tray.
Step 77

Install the battery tray screws

iPhone 17 Pro USB-C Port Assembly Replacement — Install the battery tray screws ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a Torx Plus 4IP screwdriver to install the battery tray screws:
  • One 7.5 mm‑long screw
  • One 5.9 mm‑long screw
  • One 3.4 mm‑long screw
  • One 2.3 mm‑long screw
  • Nine 3.7 mm‑long screws
  • One 3.7 mm‑long screw
  • iPhone models with a physical SIM card won't have this screw.
Step 78

Clean the frame

iPhone 17 Pro USB-C Port Assembly Replacement — Clean the frame ⌕
Heat Gun
TOOL USED ON THIS STEP Heat Gun Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Work around the fragile grounding clips as you clean the frame. If you bend one out of place, gently bend it back with your fingers or tweezers.
  • Use tweezers or your fingers to remove large pieces of adhesive from the frame perimeter.
  • Use a spudger to scrape the adhesive residue off the frame.
  • If the adhesive feels stubborn, apply some heat using a hair dryer or heat gun and try again.
Step 79

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Use a lint-free cloth or a coffee filter to wipe in one direction along the perimeter of the frame to clean the adhesive residue.
  • If the residue feels sticky, apply a few drops of isopropyl alcohol to the cloth and wipe again.
  • Take your time doing this. A clean frame allows replacement adhesive to lay evenly, ensuring a better bond.
Step 80

Clean the screen

iPhone 17 Pro USB-C Port Assembly Replacement — Clean the screen ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • If you're reusing your screen, apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to a microfiber or lint-free cloth and wipe around the perimeter to prepare the surface for new adhesive.
Step 81

Orient the replacement adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Orient the replacement adhesive ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Without peeling any liners, lay the adhesive sheet over the frame to determine its proper orientation.
  • Use features such as the camera cutout and notches along the top and bottom edges to visualize how the adhesive will lay in the frame.
Step 82

Apply the replacement adhesive

iPhone 17 Pro USB-C Port Assembly Replacement — Apply the replacement adhesive ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Grab the tab in the corner of the adhesive sheet and peel the liner to expose a third of the adhesive.
  • The exposed adhesive is very sticky. Don't let it touch anything until you're ready to apply it to the frame.
  • If your adhesive has multiple liners, peel the liner that exposes the side that sticks to the frame.
Step 83

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Once the adhesive is pressed into place, you can't reposition it—you'll have to remove it and start over with new adhesive.
  • Carefully align the exposed edge of the adhesive strip with the corresponding edge of the iPhone's frame.
  • When it's correctly aligned, gently press the exposed adhesive strip onto the frame.
Step 84

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
iFixit Opening Picks (Set of 6)
TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide
View item
  • Continue peeling away the liner from the adhesive, gently pressing the adhesive into place.
  • If you've correctly aligned the adhesive, the edges will fall perfectly into place.
  • If your adhesive is slightly misaligned, gently pull the long edges into alignment with the frame.
  • If the adhesive begins to crease or wrinkle, remove it and start over with fresh adhesive.
  • If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.
Step 85

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use a spudger to press the adhesive around the entire perimeter of your iPhone.
  • Work around the fragile grounding clips. If you bend one out of place, gently bend it back with your fingers or tweezers.
  • Don't press too hard, or you'll stretch and deform the adhesive.
Step 86

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use the pull tab to peel off the large front liner from the adhesive. The pull tab is often in a corner of the liner.
  • At this point, you'll still have liners covering the perimeter. Don't remove these liners yet—they prevent the adhesive from accidentally sticking while you reassemble your iPhone.
Step 87

Connect the screen

iPhone 17 Pro USB-C Port Assembly Replacement — Connect the screen ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Set the iPhone screen next to the frame such that the screen cables can comfortably reach the logic board.
Step 88

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use your finger or the flat end of a spudger to press and connect the two screen connectors onto the logic board.
  • Don't try to force the connector into place. If you're having trouble, reposition it and try again.
Step 89

Connect the battery

iPhone 17 Pro USB-C Port Assembly Replacement — Connect the battery ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use your finger or the flat end of a spudger to press and connect the battery connector onto the logic board.
Step 90

Test your repair

iPhone 17 Pro USB-C Port Assembly Replacement — Test your repair ⌕
  • This is a good point to test your repair before sealing up your iPhone. Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.
  • If your iPhone doesn't turn on, connect it to a power source and try again.
Step 91

Install the battery connector cover

iPhone 17 Pro USB-C Port Assembly Replacement — Install the battery connector cover ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Tuck the top edge of the battery connector cover under the cutout lip.
  • Make sure both tabs are tucked under the lip.
  • Align the cover by its screw hole and lay it in place.
Step 92

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the 1.2 mm‑long screw to secure the battery connector cover.
Step 93

Install the screen connector cover

iPhone 17 Pro USB-C Port Assembly Replacement — Install the screen connector cover ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Tuck the left edge of the screen connector cover under the cutout lip.
  • Align the cover by its screw hole and lay it in place.
Step 94

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a JIS 00 screwdriver to install the 1.2 mm‑long screw to secure the screen connector cover.
Step 95

Remove the final adhesive liners

iPhone 17 Pro USB-C Port Assembly Replacement — Remove the final adhesive liners ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • With one hand hold the screen steady.
  • Use your fingers or a spudger to peel away all perimeter liners, exposing the adhesive.
  • Make sure nothing touches the exposed adhesive.
  • Check the internals for any stray liners and remove them. There should be no liners remaining.
Step 96

Install the screen

iPhone 17 Pro USB-C Port Assembly Replacement — Install the screen ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Lower the screen onto the frame, beginning with the top edge.
  • If you feel resistance, a perimeter clip may have bent out of place and is being crushed by the frame. Look at the point of resistance and gently straighten any bent clips.
  • Make sure the screen edge isn't pinching any cables.
  • Press along the edges of the iPhone until the screen sits flush against the frame.
Step 97

Repair step

iPhone 17 Pro USB-C Port Assembly Replacement — repair step ⌕
  • Firmly squeeze around the entire perimeter of the iPhone.
Step 98

Apply heat to the perimeter

iPhone 17 Pro USB-C Port Assembly Replacement — Apply heat to the perimeter ⌕
Heat Gun
TOOL USED ON THIS STEP Heat Gun Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Isopropyl Alcohol (90% or Greater) Referenced by the iFixit guide
View item
  • Use a hair dryer or a heat gun to heat the screen perimeter until it's slightly too hot to touch.
  • The heat softens the adhesive and helps create a better bond.
Step 99

Install the pentalobe screws

iPhone 17 Pro USB-C Port Assembly Replacement — Install the pentalobe screws ⌕
4IP Torx Plus Bit
TOOL USED ON THIS STEP 4IP Torx Plus Bit Referenced by the iFixit guide
View item
JIS 00 Screwdriver Bit
TOOL USED ON THIS STEP JIS 00 Screwdriver Bit Referenced by the iFixit guide
View item
  • Use a P2 pentalobe screwdriver to install the two 7.5 mm‑long screws on either side of the charging port.