iPhone 15 Pro Taptic Engine Installation

Prerequisite only guide to install the Taptic...

Apple iPhone 15 Pro Moderate No estimate Guide 207922

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Prerequisite only guide to install the Taptic Engine in an iPhone 15 Pro.

Step 1

Transfer the plastic buffer

⌕

Transfer the plastic buffer from the top edge of the old Taptic Engine to your replacement part.
This buffer sits between the Taptic Engine and the battery. Align a short edge of the buffer with the left edge of the Taptic Engine.

Step 2

Install the Taptic Engine

⌕

Set the Taptic Engine into place.

Step 3

Install the Taptic Engine screws

⌕

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips #000 screwdriver to install the two 2 mm‑long screws securing the Taptic Engine.

Step 4

Connect the Taptic Engine

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use your finger or the flat end of a spudger to connect the Taptic Engine press connector to its socket on the frame.