iPhone 15 Pro Front Camera Assembly Removal

Prerequisite only guide to remove the front...

Apple iPhone 15 Pro Moderate No estimate Guide 209977

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Prerequisite only guide to remove the front camera assembly in an iPhone 15 Pro.

Step 1

Move the microphone cable

⌕

TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

The microphone cable covers the front sensors press connector.
Use the tip of an opening pick to disconnect the microphone press connector from the top left corner of the logic board.
Lift the cable out of the way so you can access the two press connectors on the logic board's top edge.

Step 2

Disconnect the front camera assembly

⌕

TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use the tip of an opening pick to pry up and disconnect the front sensors and front camera press connectors from the top edge of the logic board.

Step 3

Remove the front camera assembly

⌕

Remove the front camera assembly.
Be careful not to touch or smudge the camera or sensor lenses.