Home/ Repair guides/ 2010-2015 Chevrolet Camaro Center Dome Light Bu…

Official iFixit API visual reference

2010-2015 Chevrolet Camaro Center Dome Light Bulb Replacement

Given enough time, your 5th-Generation...

iFixit Library Chevrolet Easy 3 - 6 minutes Guide 210421

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Given enough time, your 5th-Generation Chevrolet Camaro Center Dome LED light bulb will begin to wear down. This will cause your Interior center dome light to dim and eventually lose its lighting. Use this guide to help you replace the LED light of the center dome for a 5th-Generation (2010-2015) Chevrolet Camaro. Before taking out any parts, turn off the car engine and the center dome light. If the light was recently turned on, wait at least 5 minutes for the light bulb to cool down. For step 1, you will be required to pry open the housing assembly.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Pry the assembly dome light using a spudger.

Step 2

Repair step

⌕

Using two fingers, pinch and pull the dome light assembly downward until it's hanging.

Step 3

Repair step

⌕

Use your hand to grab and pull down the assembly. Be sure to pull each side of the assembly after the other.

Step 4

Repair step

⌕

Pinch the LED bulb with 2 fingers.
Pull downward until the LED comes out.

Step 5

Repair step

⌕

Insert the replacement bulb into the housing.
Push the bulb upwards with your thumb until it pops inside
If replacing with LED (T10), be sure to test the bulb while you still have the assembly out as LED bulbs are typically directional, which, if installed in the wrong direction, may result in a non-powered bulb.

Step 6

Repair step

⌕

Reinsert the dome light assembly.
Press around the edges until the clicking sound stops.