Home/ Repair guides/ 2007-2012 Hyundai Santa Fe Cabin Air Filter Rep…

Official iFixit API visual reference

2007-2012 Hyundai Santa Fe Cabin Air Filter Replacement

If it's time to change the cabin air filter on...

iFixit Library 2007-2012 Hyundai Santa Fe Moderate 5 - 10 minutes Guide 212117

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If it's time to change the cabin air filter on your 2010 Hyundai Santa Fe, this guide will help you complete the replacement. The cabin air filter removes dust and debris from entering your vehicle. A dirty filter can reduce airflow and put stress on the HVAC system to work harder. Before starting, make sure the vehicle is off, so no debris flies out and spreads around the vehicle.

Step 1

Repair step

⌕

Locate the glovebox on the passenger side of the vehicle dashboard.
Pull the handle to open the glovebox.
Remove all Items from inside the glovebox.

Step 2

Repair step

⌕

Locate the rubber stoppers on both sides of the glovebox.

Step 3

Repair step

⌕

Pull the side of the glovebox inward and push down to release the plastic stopper.
Apply steady pressure if the stopper does not release easily.

Step 4

Repair step

⌕

Pull the opposite (left side) of the glovebox inward and push down to release the second plastic stopper.
Apply steady pressure if the stopper does not release easily.

Step 5

Repair step

⌕

Gently press both sides of the glovebox inward, then lower it to access the cabin air filter compartment.

Step 6

Repair step

⌕

Press the tabs on both sides of the air filter cover inward, then pull the cover toward you to remove it.

Step 7

Repair step

⌕

Gently pull the old air filter straight out of the compartment.

Step 8

Repair step

⌕

Insert the new cabin air filter into the compartment.
Write the day or mileage on the filter for future maintenance tracking.
Ensure the arrows on the side of the filter are facing downward when installing.

Step 9

Repair step

⌕

Align the air filter cover with the housing and push it into place until the side tabs click securely.

Step 10

Repair step

⌕

Lift the glovebox back into position.
Reinsert the rubber stoppers by pushing them into the hole and sliding them upward until they lock in place.
It might take a few tries.

Step 11

Repair step

⌕

Reinsert the second rubber stopper by pushing it into the hole and sliding it upward until it locks in place.
It might take a few tries.

Step 12

Repair step

⌕

Close the glovebox.