FIXONICBefore you begin
Prerequisite only guide to install the ambient light sensor in an iPhone 15 Pro.
Official iFixit API visual reference
Open the authorised source
iPhone 15 Pro Ambient Light Sensor Installation
Prerequisite only guide to install the ambient...
Apple iPhone 15 Pro
Moderate
No estimate
Guide 212933
Licensed iFixit integration
This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.
Prepare the ambient light sensor
- Use tweezers to reposition any adhesive that may have covered the ambient light sensor during removal. The adhesive should form a border around the raised white rectangle.
- If the adhesive was damaged or stayed with the old screen, replace it with a 1 mm‑wide strip of thin, double-sided tape along its bottom border.
Place the ambient light sensor
Press the ambient light sensor
- Use a hair dryer or heat gun to soften the adhesive under the ambient light sensor and its cable. It only needs to be warm—not hot.
- Use your finger to press down the ambient light sensor cable.
Install the ambient light sensor bracket
- Use tweezers or your fingers to place the ambient light sensor bracket, foam side down, aligned with its screw holes.
- Use a Phillips screwdriver to install the two 1.4 mm‑long screws securing the ambient light sensor bracket.