2010-Present Toyota 4Runner Antenna and Antenna Ornament Replacement

Use this guide to replace a damaged antenna...

iFixit Library 2010-Present Toyota 4Runner Very easy 5 - 10 minutes Guide 224837

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Use this guide to replace a damaged antenna rubber bezel on a 2011 Toyota 4Runner. A worn ornament lets water leak into the fender. Replacing it prevents leaks and keeps your truck clean. You do not need complex tools for this quick fix.

Step 1

Repair step

⌕

Pry the black rubber antenna base ornament upward off the fender mounting bracket using a flathead screwdriver or plastic trim tool.

Step 2

Repair step

⌕

Place the flexible rubber antenna ornament over the metal base mounting bracket on the fender.
Press the ornament straight down to plug it firmly into place.
This grommet acts as a perfect plug-and-play replacement to tighten your antenna and keep it from wiggling all around.
If the rubber ornament is stubborn, a flathead screwdriver can be used to gently help push the edges of the grommet down until it is completely flush with the car body.

Step 3

Repair step

⌕

Thread the antenna mast back into the metal receptacle clockwise by hand, then use an adjustable wrench to carefully tighten it until completely snug.
This will secure the antenna tightly and prevent it from wasping or wiggling around while driving.
Caution: Do not over-tighten the antenna mast with the wrench, as excessive force can strip the threads or crack the brand-new rubber ornament underneath.

Step 4

Repair step

⌕

Inspect the completely installed assembly to ensure the rubber ornament sits flush against the body panel and the antenna mast stands vertical. Give the mast a gentle wiggle check to verify it is secure and no longer loose.