Repair starts here.Sign in Create account Live auctions Repair Hub Repair guides

Sell Saved My Fixonic

Home/ Repair guides/ 2014-2023 Audi TT (FV) Infotainment Control Mod…

Official iFixit API visual reference

2014-2023 Audi TT (FV) Infotainment Control Module Removal and Installation

This guide shows how to remove and reinstall...

iFixit Library 2014-2023 Audi TT (FV) Moderate 5 - 10 minutes Guide 229782

Open the authorised source

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide shows how to remove and reinstall the infotainment control module located in the glove box of a 2014-2023 Audi TT (FV).

Step 1

Turn off vehicle

No step image supplied by iFixit.

Turn off the ignition and all electrical consumers.

Step 2

Opening the glove box

No step image supplied by iFixit.

Open the glove box.

Step 3

Remove media

No step image supplied by iFixit.

Remove any CD/DVDs and SD/SIM cards remaining in the information electronics control unit.

Step 4

Insert the release tools

No step image supplied by iFixit.

Insert both release tools into the release slots on the control unit until they click into place (audible click).
The handle loops should point outward.

Step 5

Pull out the control unit

No step image supplied by iFixit.

Pull the control unit out of the glove compartment using the handle eyelets.

Step 6

Disconnecting connectors

No step image supplied by iFixit.

Unlock and disconnect the connectors on the control unit.
If the control unit is being replaced, use the "replace control unit" function with a vehicle diagnostic tool.

Step 7

Protecting connectors

No step image supplied by iFixit.

Place the protective cap onto the connectors.

Step 8

Removing release tools

No step image supplied by iFixit.

To pull out the release tools, press the locking tabs on the sides.