FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ 1996-1998 Subaru Legacy Oil Change
Official iFixit API visual reference

1996-1998 Subaru Legacy Oil Change

Attributed iFixit repair guide for 1994-1999 Subaru Legacy.

iFixit Library 1994-1999 Subaru Legacy Very easy 20 minutes Guide 32655
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Open the hood

No step image supplied by iFixit.
  • Pull the hood latch to release the front hood.
  • Go around to the front of the car and trigger the lever to raise the hood.
  • Lift the hood prop and insert the end into the hood.
Step 2

Repair step

No step image supplied by iFixit.
  • Locate the oil drain plug underneath the vehicle.
  • Put down some newspaper or cardboard to catch any spills or splashes
  • Slide the oil pan under the drain plug.
Step 3

Repair step

No step image supplied by iFixit.
  • Take your 17mm socket and loosen the drain plug.
  • Once loose enough, remove the plug by hand.
  • The oil may be hot, so wear latex gloves when removing the plug.
  • Let the oil drain out until its just a drip.
  • Clean off the plug with a paper towel or rag.
  • Re-screw drain plug back into the oil pan.
  • Make sure it's not to tight or loose - check the owners manual for torque specifications.
Step 4

Repair step

No step image supplied by iFixit.
  • Locate the Oil Filter on the underside of the car.
  • Remove the oil filter and let the oil drain out.
  • Re-add the new, fresh oil filter.
Step 5

Repair step

No step image supplied by iFixit.
  • Add 4.8 Quarts of new oil.