FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ Xbox 360 Wireless Controller Rear Case Replacem…
Official iFixit API visual reference

Xbox 360 Wireless Controller Rear Case Replacement

Stop holding your Xbox 360 wireless controller...

Microsoft Xbox 360 Wireless Controller Moderate No estimate Guide 3291
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Stop holding your Xbox 360 wireless controller together with duct tape. Use this guide to replace your old broken rear case.

Step 1

Repair step

Xbox 360 Wireless Controller Rear Case Replacement — repair step ⌕
  • Depress the battery release button on the top of the controller.
  • Remove the battery holder from the controller.
  • The standard option for Xbox 360 Wireless Controllers Battery Packs is AA batteries. A rechargeable battery is also available, but both battery options are removed from the controller in the same way.
Step 2

Repair step

Xbox 360 Wireless Controller Rear Case Replacement — repair step ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use a pair of tweezers to peel the barcode sticker from the battery compartment.
Step 3

Repair step

Xbox 360 Wireless Controller Rear Case Replacement — repair step ⌕
T8 Torx Security Bit Screwdriver
TOOL USED ON THIS STEP T8 Torx Security Bit Screwdriver Referenced by the iFixit guide
View item
  • Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
Step 4

Repair step

Xbox 360 Wireless Controller Rear Case Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Insert a Spudger between the front and rear cases along the left edge of the controller.
  • Rotate the spudger toward the front of the controller, prying the two cases apart.
Step 5

Repair step

Xbox 360 Wireless Controller Rear Case Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Insert a spudger between the front and rear cases, near the headphone jack.
  • Rotate the spudger toward the front of the controller to pry the two cases apart.
Step 6

Repair step

Xbox 360 Wireless Controller Rear Case Replacement — repair step ⌕
  • Grasp the controller by the battery compartment and the headphone jack.
  • Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board.
  • The battery contact springs are held in place by slots in the battery housing in the rear case. Be sure to realign them properly during reassembly.