2011-2013 Scion tC Mid-Range Door Speaker Replacement

Step 1

Repair step

⌕

• Using plastic pry tool. Pry silver cover from handle.

Step 2

Repair step

⌕

• Using plastic pry tool. Pry Control panel off which controls locking, unlocking and windows.

Step 3

Repair step

⌕

• Un-attach white header(connector) from control panel. Push side tab on side of white connector if a little stuck.

Step 4

Repair step

⌕

• Using pry tool. Pry off plastic plate in section of door lock or pull handle.

Step 5

Repair step

⌕

TOOL USED ON THIS STEP Phillips #0 Screwdriver Referenced by the iFixit guide

View item

• Remove the #4 25mm screw and the #2 25mm screw on panel with a standard Phillips Screwdriver.

Step 6

Repair step

⌕

• Pry Off Full Door Panel starting at bottom and working up the side, pulling fairly hard waiting. Clicking noises are a good sign the door panel is unlocking.

Step 7

Repair step

⌕

• Once door panel is free, remember to remove header from the tweeter in upper right hand corner of panel.

Step 8

Repair step

⌕

TOOL USED ON THIS STEP Phillips #0 Screwdriver Referenced by the iFixit guide

View item

• Remove bracket from door by unscrewing the two 14 mm nuts pictured here connected to the speaker unit.

Step 9

Repair step

⌕

TOOL USED ON THIS STEP Phillips #0 Screwdriver Referenced by the iFixit guide

View item

• Remove speaker from bracket by unscrewing the two #2 12mm screws using a Phillips head screwdriver.

Step 10

Repair step

⌕

• Desolder wires to new speaker unit using solder wick or a desoldering tool.
• If you don't have experience soldering, make sure to check out this soldering guide.
• Soldering uses high temperatures. Be careful not to damage the components or injure yourself in the process.