FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ 1999-2002 Suzuki SV650 Coolant Drain
Official iFixit API visual reference

1999-2002 Suzuki SV650 Coolant Drain

PRE-REQ ONLY

iFixit Library 1999-2002 Suzuki SV650 Moderate No estimate Guide 6503
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

PRE-REQ ONLY

Step 1

Repair step

1999-2002 Suzuki SV650 Coolant Drain — repair step ⌕
Phillips #1 Screwdriver
TOOL USED ON THIS STEP Phillips #1 Screwdriver Referenced by the iFixit guide
View item
  • Remove the radiator cap security screw with a Phillips #1 screw driver by turning it counter-clockwise.
  • Remove the radiator cap by pressing down on it and turning it counter-clockwise until it can be lifted off the radiator.
  • If your engine has been running recently, be very careful. The system may be pressurized and hot which will cause coolant to flow out through the radiator filler hole when the cap is removed.
Step 2

Repair step

1999-2002 Suzuki SV650 Coolant Drain — repair step ⌕
  • Locate the 10 mm hex coolant drain plug. It is on the right engine cover, just below the coolant outlet.
  • Turn the coolant drain plug counter-clockwise with a 10 mm socket wrench or box end wrench until it can be turned freely by hand.
  • Place a container under the drain plug to catch the coolant when it streams out of the coolant drain hole.
  • Coolant capacity is 1.7L, ensure your container can accommodate this.
  • If you are not using a pan style container, it is recommended that you use a funnel to help prevent spills.
Step 3

Repair step

1999-2002 Suzuki SV650 Coolant Drain — repair step ⌕
  • Finish removing the drain plug by hand and allow the coolant to drain into the container.
  • Once the draining coolant has slowed to a drip, stand the bike up vertically to allow the last of it to drain.
Step 4

Repair step

1999-2002 Suzuki SV650 Coolant Drain — repair step ⌕
  • Put the coolant drain plug back in its hole and turn it clockwise with a socket wrench or box end wrench until it is snug.
  • Do not over-tighten the drain plug or you risk stripping the threads. Suzuki rates the drain plug torque at 9.5 lb-ft (13 N-m).
  • Place the radiator cap back over the filler hole and turn it clockwise until is snug.
  • Placing the radiator cap back on the radiator will prevent debris from entering the radiator while working on the bike.