1998-2002 Honda Accord Tail Light Bulb Assemblies Replacement

PRE-REQ

iFixit Library 1998-2002 Honda Accord Moderate No estimate Guide 7300

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

PRE-REQ

Step 1

Repair step

⌕

Open the trunk using your key in the trunk key slot or by using the lever under the driver's console.

Step 2

Panel Tail Lights

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

Remove the small plastic screw along the vertical edge of the trunk entrance using a flathead screwdriver.
Carefully peel back the trunk liner from around the edge of trunk opening by the light.
Locate the two panel tail light connectors located between the liner and the panel tail light assembly.

Step 3

Repair step

⌕

Grab a light bulb socket and turn it counterclockwise until it can be removed from its hole.
Repeat this process for the other light bulb socket.

Step 4

Trunk Lid Tail Lights

⌕

Locate the light bulb sockets in the trunk lid, located on the back side of the trunk tail lights.
Turn the light bulb sockets counterclockwise and remove them from their holes.