FIXONICBefore you begin
Use this guide to replace the front bumper on your '98 to '02 Honda Accord.
Official iFixit API visual reference
Open the authorised source
1998-2002 Honda Accord Front Bumper Replacement
Use this guide to replace the front bumper on...
iFixit Library 1998-2002 Honda Accord
Moderate
15 - 30 minutes
Guide 7319
Licensed iFixit integration
This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.
Repair step
- Locate and remove the bolts in the front of the wheel well on the either side of the car using a #1 Phillips screw driver or an 8 mm socket wrench.
- Locate the bolts on the bottom of both corners of the bumper and remove them using an 8 mm socket wrench or box end wrench.
Repair step
- Locate the plastic push pins along the bottom of the bumper.
- Use a small thin prying device, such as a flathead screwdriver, to pop the heads of the push pin up. Then remove the entire push pin assembly from their holes.
Repair step
- Remove the push pins on the two raised portions of the bumper next to the inside of the headlights.
- There are four clips along the top of the bumper still holding it in place. Gently lift the bumper while pulling it away from the car to free the clips and remove the bumper.