FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

1995-2001 Honda CRV Radio Replacement

If your radio has stopped working or you are...

iFixit Library 1995-2001 Honda CRV Difficult 40 minutes - 2 hours Guide 78433
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If your radio has stopped working or you are looking to upgrade your factory radio, you can use this guide to remove the factory radio from your 1995-2001 Honda CRV. Follow these steps to remove the radio.

Step 1

Repair step

  • Remove the clips in the glovebox by pushing them in.
  • Using a Phillips #0 screwdriver, remove one screw on left side of the glovebox frame and one screw on the right side of the glove box.
Step 2

Repair step

  • Use your hands to open the fold-down pocket.
  • Use a Philips #0 screwdriver to remove the four screws surrounding the fold-down pocket.
  • Use the Phillips #0 to remove the final screw from the fold-down pocket.
Step 3

Repair step

  • Use a plastic panel tool to remove the plastic clip from the left side of the trim panel below the fold down pocket.
  • Use the same panel tool to remove the plastic clip from the right side of the trim panel below the fold down pocket.
Step 4

Repair step

  • Use a Phillips #0 screwdriver to remove the two screws from the driver-side dashboard.
  • Use a plastic panel tool to unclip the edges of the dashboard.
Step 5

Repair step

  • Use your hands to pull off the center dash.
  • Remove the 13mm screws connecting the console to the frame.
Step 6

Repair step

  • Use your hand to unplug the cigarette lighter and A/C Controls.
  • Use caution to avoid damaging the wires.
Step 7

Repair step

  • Use your hands to gently remove the radio bezel.
  • Use your fingers to unclip the radio harness from the radio.