FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ Xbox One S Case Replacement
Official iFixit API visual reference

Xbox One S Case Replacement

This guide will provide you with the necessary...

Microsoft Xbox One S Moderate 5 minutes Guide 89092
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide will provide you with the necessary steps to remove your Xbox One S case. Note: The clips keeping the case on the system are fragile and may easily break during removal.

Step 1

Repair step

Xbox One S Case Replacement — repair step ⌕
  • Flip the Xbox One S so that the bottom of the case is facing upward.
Step 2

Repair step

Xbox One S Case Replacement — repair step ⌕
  • Begin by working at the case on the rear where the warranty sticker is located. Insert the plastic opening tool into the gap between the bottom of the case and the grated top side. Then find the clips in between that hold the case in place. Use the opening tool to pop the clips out. The best method is to pry the black case away from the bottom.
  • Use the opening tool to pop the clips out. The best method is to pry the black case away from the bottom.
  • You will hear clicking sounds when you are prying the case open. It may be fairly difficult to remove the bottom.
  • It's possible that the clips may break when you remove the bottom from the case.
  • We recommend starting at the back where the warranty sticker is located. Pry along the rear edge until all clips are free. From there do each side. When three sides are free start at the end of the front opposite the sync button. Be cautious and take your time and all should separate without any damage.
Step 3

Repair step

Xbox One S Case Replacement — repair step ⌕
  • Once all of the clips are opened, remove the bottom part of the case.
Step 4

Repair step

Xbox One S Case Replacement — repair step ⌕
TR10 Torx Security Screwdriver
TOOL USED ON THIS STEP TR10 Torx Security Screwdriver Referenced by the iFixit guide
View item
  • Use a T10 Torx screwdriver to remove the six green 50 mm long screws from the metal case labeled F1 through F6.
Step 5

Repair step

Xbox One S Case Replacement — repair step ⌕
  • Gently separate the interior case from the white exterior case using the appropriate method.
  • Pry the white plastic sides outwards at the rear to separate from the plastic I/O shield.