Home/ Repair guides/ 2005 Jeep Liberty Fog Light Replacement

Official iFixit API visual reference

2005 Jeep Liberty Fog Light Replacement

With this step by step repair guide, you will...

iFixit Library 2002-2007 Jeep Liberty Moderate 30 minutes Guide 97873

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

With this step by step repair guide, you will be able to replace a fog light for a 2005 Jeep Liberty.

Step 1

Repair step

⌕

Open the hood to access the radiator grill tabs.
Pull up on the first tab and repeat for the remaining four tabs.

Step 2

Repair step

⌕

Tilt the radiator grill cover forward and lift up and out to remove.

Step 3

Repair step

⌕

Using an allen wrench, turn the tension screw counter-clockwise to loosen the light housing.

Step 4

Repair step

⌕

Lift up on the tension screw to release the light housing.

Step 5

Repair step

⌕

Using a flat-head screwdriver, pull the tab outward to remove the light housing.
Repeat the procedure for the right side of the light housing.

Step 6

Repair step

⌕

Pull the light housing toward you.

Step 7

Repair step

⌕

Remove the wiring harness from the light socket by lifting up on the tab with a flat-head screwdriver.

Step 8

Repair step

⌕

Remove the light socket from the light housing by turning counter-clockwise.

Step 9

Repair step

⌕

PART USED ON THIS STEP Light socket 9145 Referenced by the iFixit guide

View item

Remove the light socket from the light housing and replace.
The light socket part number is 9145 and can be purchased at any auto parts store.
Install the new light socket back into the light housing by turning clockwise.
Plug the wiring harness back in the light socket.